User's Manual
Table Of Contents
- System Manual Book 1: System Description
- Introduction
- System Components
- Specifications
- System Specifications
- Radio and Modem
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication (SU-A/E, AU-E-NI, AU-E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- System Manual Book 2: Installation
- IF-Based Equipment
- Packing Lists
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- IF-Based Equipment
- System Manual Book 3: Commissioning
- System Manual Book 4: Operations and Administration
- Accessing the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Configuration Download/Upload
- System Manual: Appendices
2-46
BreezeACCESS 4.0 Operations and Administration
Manual Revision: 1.01
•If the Voice Priority Tag Option is enabled, a VLAN
Priority Tag is inserted in all voice frames (RTP packets)
generated by the unit before transmission to the Wireless
or Ethernet port. The tag includes a VID value of zero
and the VLAN Priority – Voice parameter.
The following table summarizes the functionality of the
internal management and voice ports in accordance with the
value of the VLAN ID – Voice & Management parameter.
The table is valid for all link types. See VLAN Link type –
Access Link and Trunk Link for some restrictions when
configuring this parameter.
Table 2-10: Management and Voice Ports Functionality – SU with Voice Support
Legend: VID-M: VLAN ID - Voice and Management
PID-M: VLAN Priority-Management
PID-V: VLAN Priority-Voice
" VLAN Link Type (AU and SU) – Defines the link type, which
actually defines the functionality of the VLAN-aware
capability of the unit.
Available options are: Hybrid Link, Trunk Link and Access
Link (Access Link is available only in SUs).
The default selection is Hybrid Link.
# Access Link (SU only) – Transfers frames while tagging/
untagging them because all devices connected to it are
VLAN-unaware. Thus, the unit cannot transfer tagged
frames.
The following table summarizes the functionality of the
data port for an access link.
Action Management Port – internal
(SU)
Voice RTP Port – internal
(SU with Voice)
Receive from
Ethernet
Tagged frames, matching VID-M
Untagged frames when
VID-M=65535
Not applicable
Receive from
Wireless
Tagged frames, matching VID-M
Untagged frames when
VID-M=65535
Tagged frames, matching VID-M
Untagged frames when
VID-M=65535
Transmit Tag Insert VID-M, PID-M If VID-M = 65535 and Voice Priority
Tag option are enabled, Tag insert
VID=0, PID-V.
If VID-M not equal to 65535, insert
VID-M and PID-V