User's Manual
Table Of Contents
- System Manual Book 1: System Description
- Introduction
- System Components
- Specifications
- System Specifications
- Radio and Modem
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication (SU-A/E, AU-E-NI, AU-E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- System Manual Book 2: Installation
- IF-Based Equipment
- Packing Lists
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- IF-Based Equipment
- System Manual Book 3: Commissioning
- System Manual Book 4: Operations and Administration
- Accessing the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Configuration Download/Upload
- System Manual: Appendices
2-44
BreezeACCESS 4.0 Operations and Administration
Manual Revision: 1.01
" VLAN ID-Data (SU unit only) – Applicable for Access links
only. Sets the VLAN ID for data frames, identifying the VLAN
to which the unit belongs.
Valid values: 1 to 4094.
Default value: 1.
Frames received from the Wireless link port:
• Only tagged frames with VLAN ID (VID) value equal to
the VLAN ID Data defined in the unit are forwarded to
the Ethernet port.
• The tag headers are removed from the data frames
received from the wireless link prior to transmitting them
on the Ethernet port.
Frames received from the Ethernet port:
• A VLAN data tag is inserted in all untagged frames
received from the Ethernet port before transmission on
the wireless link. The tag includes the values of the VLAN
ID – Data and the VLAN Priority – Data parameters.
• Tagged frames received on Ethernet port which are
designed to be forwarded to the Wireless link port are
discarded (including frames with priority tag for
prioritization purpose only).
" VLAN ID-Management (AU, SU without voice and GU) –
Applicable for all link types. Sets the VLAN ID for
management frames, identifying remote stations for
management purposes. This applies to all management
applications using protocols such as SNMP, TFTP, ICMP
(ping) and Telnet. All the servers/stations using these
protocols must tag the management frames they send to the
unit with the value of the VLAN ID – Management parameter.
Valid values: 1 to 4094 or 65535 (No VLAN).
Default value: 65535.
If VLAN ID – Management is other than 65535:
• Only tagged management frames with matching VLAN ID
received on either the Ethernet or wireless link ports are
forwarded to the unit.
• A VLAN Management Tag is inserted in all management
frames generated by the unit before transmission on
either the Ethernet or wireless link port. The tag includes
the values of the VLAN ID – Management and the VLAN
Priority – Management parameters.
If VLAN ID – Management is 65535 (No VLAN):
• Only untagged management frames received on either
Ethernet or wireless link ports are forwarded to the unit.
• Management frames generated by the unit will not be
tagged.