User's Manual

2-16
BreezeACCESS 4.0 Operations and Administration
Manual Revision: 1.01
The Rx, Tx and RTx per hop counters accumulate the number of
applicable frames since last reset. The counters can also be reset using
the Reset Counters option in either the Per Hop Statistics menu or in
the Traffic Counters menu.
The general rate (Frames per second) statistics is the average rate
during the last 64 hops.
The display is continuously updated. Press any key to exit.
Ping Test (AU, SU and GU)
The Ping Test menu includes the following options:
! Destination IP Address – Displays the IP address of the destination
unit for pinging. Allows entering an IP address (4 x 3 digit octets,
separated by dots).
The default IP address is 192.000.000.001.
! No. of Pings – Enter the number of ping attempts per session.
The allowed range is from 0 to 9999. Select 0 for continuous
pinging.
The default value is 1.
! Ping Frame Length – Enter the ping packet size.
The allowed range is from 60 to 1472 bytes.
The default value is 64 bytes.
! Ping Frame Timeout – Enter the ping frame timeout, which is the
amount of time (in ms) to wait between ping attempts.
The allowed range is from 200 to 60000 ms, in increments of 200
milliseconds (200, 400, 600,……60000).
The default value is 200 ms.
Num The number of the information row, assigned automatically and
sequentially by the program.
Freq The hopping frequency, according to the hopping sequence.
Rx The accumulated number of frames received at the specified
frequency since last reset.
Tx The accumulated number of frames transmitted successfully at
the specified frequency since last reset.
RTx The accumulated number of frames re-transmitted at the
specified frequency since last reset.
avrDBM
(avrRSSI)
The average RSSI (Received Signal Strength Indication) in dBm
or RSSI units (according to the RSSI Display Option) of all the
frames received at the specified frequency since the last reset. If
no frames have been received, the avrRSSI is NA (Not
Available).