User's Manual
Table Of Contents
- System Manual Book 1: System Description
- Introduction
- System Components
- Specifications
- System Specifications
- Radio and Modem
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication (SU-A/E, AU-E-NI, AU-E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- System Manual Book 2: Installation
- IF-Based Equipment
- Packing Lists
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- IF-Based Equipment
- System Manual Book 3: Commissioning
- System Manual Book 4: Operations and Administration
- Accessing the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Configuration Download/Upload
- System Manual: Appendices
Menus and Parameters
2-15
BreezeACCESS 4.0 System Manual
! Duplicate frames discarded – Displays the number of frames
discarded due to receiving multiple copies. If an acknowledge
message was not received by the originating unit, the same data
frame can be properly received twice (or more). Although duplicate
frames are included in all counters that count data frames, only the
first copy is forwarded to the Ethernet port.
! Internally discarded MIR/CIR – Displays the number of data
frames received from the Ethernet port that were discarded by the
MIR/CIR mechanism to avoid exceeding the maximum allowed
information rate.
Voice Statistics (SU with Voice
Support Only)
The voice statistics counters display information concerning voice and
fax traffic, including T.38 redundant fax traffic. The displayed
information includes the accumulated numbers since the last reset for
transmitted and received RTP frames and bytes.
! Display Counters – Displays the current value of the following voice
counters.
" Voice Frames Transmitted
" Voice Frames Received
" Voice Bytes Transmitted
" Voice Bytes Received
! Reset Counters – Resets the voice counters.
Per Hop Statistics (AU and SU)
The Per Hop Statistics provide information on performance of the
wireless signal at different hopping frequencies. The Per Hop Statistics
menu includes the following options:
! Display Counters – Displays the continuously updated statistics.
! Reset Counters – Resets the Per Hop Statistics counters.
The Display Counters option displays various statistics for each of the
hopping frequencies. In addition, it displays some general wireless link
performance statistics.