User's Manual

Appendix B. Basic Parameters
BreezeACCESS Series 33 Base Station Equipment Installation Manual
APPENDIX B. BASIC PARAMETERS
The following parameters are relevant to all BreezeACCESS products.
•
IP Address
– Displays the current IP address of the unit and allows entry of
a new IP address (4 x 3 digit octets, separated by dots). The default IP
Address is 010.000.000.001.
•
Subnet Mask
– Displays the current subnet mask of the unit and allows
entry of a new subnet mask (4 x 3 digit octets, separated by dots). The
default mask is 255.000.000.000.
•
Default Gateway Address
– Displays the current address of the default
gateway of the unit and allows entry of a new default gateway address (4 x 3
digit octets, separated by dots). The default gateway address is
000.000.000.000.
•
ESS ID
– The ESSID (Extended Service Set ID) of the unit (up to 32
printable ASCII characters). The ESSID is a string used to identify a wireless
network. It prevents the unintentional merging of two co-located wireless
networks. An SU can only associate with an AU that has an identical ESSID.
Use different ESSIDs to segment the wireless access network and add
security to your network. The default value is
ESSID1
.
Note:
The ESSID string is case-sensitive.
•
DHCP Client
⇒
DHCP Options –
Displays the current status of the DHCP (Dynamic
Host Configuration Protocol) support, and allows selecting a new
operation mode. The available options are:
∗
Disable
– Use manual procedure for configuring the IP
parameters.
∗
DHCP Only –
Search for a DHCP Server and obtain the IP
parameters from it (IP Address, Subnet Mask and Default
Gateway Address).