User's Manual

Appendix A. Using Telnet
Base Station Equipment Installation Manual 32 BreezeACCESS Series
5. In the
Host Name
field, enter the IP address of the unit to be managed.
6. Set the
Port
field to Telnet (this is the default).
7. Set the
Terminal Type
to VT100 (this is the default). If the VT100 option in
not available, do the following. Select Terminal-Preferences from the Telnet
window menu and click the VT-100/ANSI radio button (as shown below).
8. Click in the Connect dialog box. The Select Access Level of the
Monitor program should be displayed.
9. To exit the Telnet session, choose
Disconnec
t from the
Connect
menu.
(The session is terminated automatically, after a specific time of inactivity is
determined by the Log-out Timer).