User's Manual

Verifying Correct Operation
BreezeACCESS Series 25 Base Station Equipment Installation Manual
4.3 Verifying Correct Operation of the Outdoor Unit
To verify proper operation, view the LED indicators located on the bottom panel
of the Outdoor unit as shown in Figure 2-3 on page 9.
Table 4-2 lists the various LED states.
Table 4-2. AU-RA/RE LEDs
Name Description Functionality
ALARM Alarm
Indication
On – A problem with the power amplifier or in
the locking process of any of the synthesizers
Off –Normal operation
12V IN 12V DC power
supply
On – 12VDC power is supplied to the unit
Off – 12VDC is not available
ETH Ethernet activity Blinking – Data received from or transmitted to
Ethernet LAN
Off – No activity on the Ethernet LAN
Note
: Verifying proper operation of the outdoor unit using the LEDs as described
above is possible only after completion of the configuration process.