User's Manual

Basic Installation
Base Station Equipment Installation Manual 12 BreezeACCESS Series
2.6.2 The BS-AU
The BS-AU front panel is shown in Figure 2-6.
BS-AU
MON
IF
ETH
RESET
OFF
ON
PWR
ALRM
WLNK
MASTER
Figure 2-6. BS-AU Front Panel
The BS-AU provides the following interfaces:
An Ethernet connector (ETH) for connecting the BS-AU to the network. This
connector should be connected to a straight Ethernet cable.
An IF connector for connecting the BS-AU to an outdoor AU-RE or AU-RA radio
unit. The outdoor radio unit provides the air link between the BS-AU and the
remote Subscriber Units.
A MON connector for connecting an ASCII terminal with terminal emulation
software for configuration and maintenance purposes.