User's Manual

Basic Installation
Base Station Equipment Installation Manual 10 BreezeACCESS Series
Note:
The bottom panel of the BreezeACCESS AU-RA radio unit is identical to the
one shown in Figure 2-4, but does not have the ANT connector.
1. Connect one end of the grounding cable to the Ground terminal and connect
the other end to a good ground connection.
2. Connect the coaxial cable to the IF connector. Verify that the length of the IF
cable is sufficient and that it can easily reach the Indoor unit.
Note:
Make sure to switch OFF the power of the indoor unit prior to
connecting/disconnecting the IF cable.