User's Manual
Basic Installation
Base Station Equipment Installation Manual 4 BreezeACCESS Series
2.2 Packing List – Stand-alone AU-A/E-NI Access Unit
•
AU-NI indoor unit
•
Outdoor unit:
⇒
AU-RA with integral antenna
OR
⇒
AU-RE with a connector to an external antenna (not included)
•
AU-PS power supply with a mains power cord
•
Pole mounting kit for the Outdoor unit (with two brackets, four sets of
screws, nuts and washers)
•
Wall mounting kit for the AU-NI unit
2.3 Other Items Required for Installation
•
IF cable (s)* (one for each AU)
•
Grounding cable(s) with an appropriate termination (one for each AU)
•
Ethernet cable(s) (straight, one for each AU)
•
Antenna(s)* and RF cable(s)* (AU-E-NI or AU-E-BS only)
•
A portable PC with terminal emulation software
•
Installation tools and materials.
Items marked with an asterisk (*) are available as options from BreezeCOM.
2.4 Guidelines for Selection of Equipment Location
Select appropriate locations for the equipment using the following guidelines:
•
The outdoor unit can be pole—or wall mounted. Its location should allow
easy access to the unit for installation and testing.
•
The AU-RA unit with its integrated antenna, or the external antenna connected
to the AU-RE unit, should be installed where it provides coverage of all
subscriber units in the area it is intended to serve. The higher the AU-RA or
the antenna, the better coverage it can provide.