User's Manual

Introduction
Base Station Equipment Installation Manual 2 BreezeACCESS Series
BreezeACCESS products use Frequency Hopping Spread Spectrum radios and
are available in the following frequency bands:
•
BreezeACCESS II
products operate in Time Division Duplex (TDD)
mode in the 2.4-2.5GHz frequency band. The exact frequencies vary in
accordance with specific country’s radio regulations. BreezeACCESS II
products are available with an output power at the antenna port of either
26dBm (HP), 15dBm (GP), 7dBm (MP) or 2dBm (LP).
•
BreezeACCESS MMDS
products operate on Time Division Duplex
(TDD) mode in the 2.500-2.686GHz frequency band.
•
BreezeACCESS XL
products operate in Frequency Division Duplex
(FDD) mode, and are currently available in the following frequency bands:
Model Uplink Band (GHz) Uplink-Downlink
Separation (MHz)
BreezeACCESS 3.5a 3.410-3.452 100
BreezeACCESS 3.5a1 3.400-3.450 100
BreezeACCESS 3.5b 3.450-3.500 100
BreezeACCESS 3.5e 3.425-3.450 50
BreezeACCESS 2.6b 2.551-2.593 74
BreezeACCESS 3.3 3.300-3.324 76
BreezeACCESS 3.8 3.925-4.015 -320
Note:
The information contained in this manual is applicable to
BreezeACCESS units with software release 3.0 and up.