User's Manual
Table Of Contents
- BreezeACCESS Version 4.3 System Manual Revision 3.0
- Contents
- Book 1: System Description
- Contents
- Chapter 1 - Introduction
- Chapter 2 - System Components
- Chapter 3 - Specifications
- System Specifications
- BreezeACCESS II Radio Regulatory Standards
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication
- (SU-A/E, AU-A/E-NI, AU-A/E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- Book 2: Installation
- Contents
- Chapter 1 - IF-Based Equipment
- Packing Lists
- SU-A/E Subscriber Unit
- Modular Base Station Equipment
- Standalone AU-A/ENI Access Unit
- Other Items Required for Installation
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- Chapter 2 - Indoor SU-R Units
- Chapter 3 - Indoor SU-I and AU-I Units
- Book 3: Commissioning
- Book 4: Operations and Administration
- Contents
- Chapter 1 - Accessing the Monitor Program
- Chapter 2 - Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Traffic Statistics (AU and SU)
- Voice Statistics (SU with Voice Support Only)
- Per Hop Statistics (AU and SU)
- Ping Test (AU, SU and GU)
- Continuous Link Quality Display (Available in SU Only)
- MAC Address Database (Available in AU Only)
- Per-rate Counters (AU and SU)
- RSSI Display Option (AU and SU)
- ATPC Counter (AU and SU)
- AU Alarms (IF-based AU Only)
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- RADIUS Parameters Menu (Subscriber Units only)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Appendices
- Appendix A - Configuration Download/Upload
- Appendix B: Software Version Loading Procedure
- Appendix C: Supported MIBs and Traps
- BreezeACCESS System Object Identifiers
- brzAccessMIB
- Service Parameters
- RADIUS General Parameters
- Accounting Parameters
- RADIUS Authentication Parameters
- User Filtering Parameters
- Network Management Parameters
- Bridge Parameters
- Air Interface Parameters
- Performance Parameters
- Site Survey Parameters
- Special Operations Parameters
- Unit Control Parameters
- IP Parameters
- System Information Parameters
- Alarms Parameters
- brzPhoneMIB (applicable to SU with voice only)
- Supported Traps
- Appendix D: RSSI to dBm Conversion Table
- Appendix E: Parameters List
- Appendix F: Hopping Sequences
- Index
Appendix C
C-45
BreezeACCESS Version 4.3 System Manual
*TrapToggle
710.3.3.14.5
(*Traps 5)
An On/Off toggle status, indicating a change in status from
off to on or vice versa.
Integer
on (1)
off (2)
*LastAUMacAddress
710.3.3.14.6
(*Traps 6)
Applicable to SU only.
The MAC address of the last AU with which the SU was
associated.
MAC address
*TrapLog
710.3.3.14.7
(*Traps 7)
Login or logout to the monitor program via the Monitor port
or Telnet.
Integer
monitorLogin (1)
monitorLogout(2)
telnetLogin (3)
telnetLogout (4)
*TrapParameterChanged
710.3.3.14.8
(*Traps 8)
A modification to one of the parameters related to CIR/
MIR, IP Filtering, Accounting (Billing) or VLAN .
Integer
cirOrMir (1)
ipFilter (2)
billing (3)
vlan (4)
*TrapAccessRights
710.3.3.14.9
(*Traps 9)
The access rights used for login. Integer
notLoggedIn (0)
readOnly (1)
installer (2)
administrator (3)
factory (4)
*TrapTelnetUserIpAddress
710.3.3.14.11
(*Traps 11)
The IP address of a Telnet user. IP address
*TrapAlarmNumber
710.3.3.14.12
(*Traps 12)
Applicable to GU only. The number of the alarm whose
status has been changed.
Integer
1-10
*TrapAlarmName
710.3.3.14.13
(*Traps 13)
Applicable to GU only. The Name of the alarm whose
status has been changed.
DisplayString
*TrapRTx
710.3.3.14.14
(*Traps 14)
Applicable to AU only. Retransmissions as a percentage of
total transmissions.
Integer
0-100
*AUAlarmsTraps
710.3.3.14.15
(*Traps 15)
Applicable to IF-based AU only. Not accessible. AU
Alarms traps variables.
*TrapAUAlarmSeverity
710.3.3.14.15.1
(*AUAlarmsTraps 1)
Applicable to IF-based AU only. Read-only. The severity of
the alarm.
Integer
minor (1)
major (2)
critical (3)
*TrapCurrentNumberOfRespond-
ingSUs
710.3.3.14.15.2
(*AUAlarmsTraps 2)
Applicable to IF-based AU only. Read-only. The number of
SUs that responded to the last polling message.
Integer
*TrapAverageNumberOfRespond-
ingSUs
710.3.3.14.15.3
(*AUAlarmsTraps 3)
Applicable to IF-based AU only. Read-only. The average
number of SUs that responded polling message since
power-up or since the AU Alarms Option was enabled.
Integer
*TrapSURxPowerAverageDelta
710.3.3.14.15.4
(*AUAlarmsTraps 4)
Applicable to IF-based AU only. Read-only. The average
for all SUs that responded to both of the last two polling
messages of the difference between the last RSSI at the
SU and the previous (one before last) RSSI. (A negative
value indicates that the average RSSI was decreased).
DisplayString
-99 to 99 (dBm)
*TrapAURxPowerAverageDelta
710.3.3.14.15.5
(*AUAlarmsTraps 5)
Applicable to IF-based AU only. Read-only. The average
for all SUs that responded to both of the last two polling
messages of the difference between the last RSSI at the
AU and the previous (one before last) RSSI. (A negative
value indicates that the average RSSI was decreased).
DisplayString
-99 to 99 (dBm)
*TrapTrafficStatisticsCurrentRate
710.3.3.14.15.6
(*AUAlarmsTraps 6)
Applicable to IF-based AU only. Read-only. The current
rate calculated for the relevant statistics type.
Integer
0-100 (%)
na (255)
*TrapTrafficStatisticsAverageRate
710.3.3.14.15.7
(*AUAlarmsTraps 7)
Applicable to IF-based AU only. Read-only. The average
rate calculated since the last time the unit was reset (or
since the AU Alarms Option was enabled) for the relevant
statistics type.
Integer
0-100 (%)
na (255)
MIB Parameter
(Location in Parenthesis)
Description Values