User's Manual

Appendix C
C-23
BreezeACCESS Version 4.3 System Manual
*CarrierSenseLevel
710.3.3. 7.7
(*PerformanceParams 7)
Applicable to SU and AU. Threshold level
for decision on existence of a carrier
signal, indicating a transmission from
another unit.
DisplayString
-100 to -40 (dB)
*DwellTime
710.3.3. 7.9
(*PerformanceParams 9)
Applicable to AU and GU.
The time spent on each radio channel
(hop). Applicable only when the
*ACSEOption is disabled.
Integer
t32KiloMicroseconds(32)
t64KiloMicroseconds(64)
t128KiloMicroseconds(128)
na (255)
*RTSThreshold
710.3.3. 7.10
(*PerformanceParams 10)
Applicable to SU and AU. The minimum
frame size that requires an RTS/CTS
handshake.
Integer
20-1600 (bytes)
*MultiRate
710.3.3. 7.11
(*PerformanceParams 11)
Applicable to SU and AU. Multi-Rate
parameters
*MultiRateSupport
710.3.3. 7.11.1
(*MultiRate 1)
Applicable to SU and AU. Enables/
disables the multi-Rate decision
mechanism.
Integer
disable (0)
enable (1)
na (255)
*MultiRateDecisionWinSize
710.3.3. 7.11.2
(*MultiRate 2)
Applicable to SU and AU. The size of the
decision window for the multi-Rate
mechanism (the number of consecutive
transmission or retransmission attempts).
Integer
1-50
na (255)
*NoOfFailuresInDecisionWindow
710.3.3. 7.11.3
(*MultiRate 3)
Applicable to SU and AU. The number of
failures in the decision window that will
cause the window to be defined as
unsuccessful.
Integer
1 to Decision Window Size.
na (255)
*GpsHoppingParams
710.3.3. 7.12
(*PerformanceParams 12)
GPS Hopping Parameters
*NumberOfHoppingFreqs
710.3.3. 7.12.1
(*GpsHoppingParams 1)
Applicable to GU Only. The Number of
Hopping Frequencies used in the AUs
controlled by the GU.
Integer
0-151
na (255)
*GpsAntennaRecovery
710.3.3. 7.12.3
(*GpsHoppingParams 3)
Applicable to GU only. Antenna Recovery
parameters.
*ManualRecoveryMode
710.3.3. 7.12.3.1
(*GpsAntennaRecovery 1)
Applicable to GU only. Enables to initiate
an antenna recovery process. Applicable
only to master GU.
cancel (0)
activateRecoveryProcedureNow (1)
na (255)
*AutomaticRecoveryMode
710.3.3. 7.12.3.2
(*GpsAntennaRecovery 2)
Applicable to GU only. Automatic Antenna
Recovery parameters.
*AutomaticRecoveryOption
710.3.3. 7.12.3.2.1
(*AutomaticRecoveryMode 1)
Applicable to GU only. Enables or
disables the automatic GPS antenna
recovery mode. Applicable only for a
master GU.
disable (0)
enable (1)
na (255)
*AutomaticRecoveryInterval
710.3.3. 7.12.3.2.2
(*AutomaticRecoveryMode 2)
Applicable to GU only. Defines the time
interval in minutes between two
consecutive activations of the automatic
recovery process.
Integer
5-1440 (minutes)
*NoiseFloor
710.3.3. 7.13
(*PerformanceParams13)
Applicable to SU and AU. Noise Floor
Level.
Display String
-115 to -50[dBm]
*CarrierToInterferenceDifference
710.3.3. 7.15
(*PerformanceParams 15
Applicable to SU and AU. The minimal
difference between the current estimated
noise level and a signal identified as a
valid carrier.
Integer
6-60 (dB)
MIB Parameter
(Location in Parenthesis)
Description Values/Range