User's Manual

Menus and Parameters
2-93
BreezeACCESS Version 4.3 System Manual
 Cadence Off – The silence time (on) in the ringing-silence
sequence of the Ringer.
Valid values are 100 – 10,000 milliseconds.
 Duration - The maximum duration of activating the ringer.
Ringing will cease upon detecting off-hook condition.
Valid values are 0 – 10,000 seconds.
 Timeouts – Defines the following timeouts:
 Min. Flash Detect Timeout and Max. Flash Detect Timeout –
A short on-hook time that is between the values of these two
parameters will be considered as Hook Flash.
Valid values: 0 – 2,000 milliseconds
 Disconnect Timeout – The minimum time for decision on an
on-hook condition.
Valid values: 0 – 2,000 milliseconds
 Inter-Digit Timeout – Applicable only for pulse dialing. The
minimum time between two consecutive pulses to be considered
as separating between two digits.
Valid values: 0 – 2,000 milliseconds
 Called Party Release Timeout – The minimum time for an
on-hook signal on the called party side to be considered as call
disconnect.
Valid values: 0 – 10,000 seconds
The following tables provide details concerning the values of the
parameters of the various call progress tones and the ringer as well as
the Timeouts for the available country standards.
Table 2-14: Parameters of Call Progress Tones and Ringer - Germany
Frequency 1 Frequency 2 Cadence Duration (s)
Tone Freq
(Hz)
Level
(dB)
Freq
(Hz)
Level
(dB)
On (ms) Off (ms)
Dial Tone 450 -18 0 0 15
Ring Back 450 -18 0 0 1000 4000 60
Busy 450 -18 0 0 500 500 15
Congestion 450 -18 0 0 250 250 0
Error 450 -18 0 0 200 200 0
High Level
Error
0000000
Ring
Frequency
25 1000 5000 60