User's Manual
Table Of Contents
- BreezeACCESS Version 4.3 System Manual Revision 3.0
- Contents
- Book 1: System Description
- Contents
- Chapter 1 - Introduction
- Chapter 2 - System Components
- Chapter 3 - Specifications
- System Specifications
- BreezeACCESS II Radio Regulatory Standards
- Data Communication
- Voice/Fax (Subscriber Units with voice support)
- Telephony (Subscriber Units with voice support)
- IF Indoor – Outdoor Communication
- (SU-A/E, AU-A/E-NI, AU-A/E-BS)
- Configuration and Management
- GU-RA GPS Radio
- GU-RA to BS-GU Communication
- Environmental
- Standards Compliance, General
- Physical Specifications
- System Specifications
- Book 2: Installation
- Contents
- Chapter 1 - IF-Based Equipment
- Packing Lists
- SU-A/E Subscriber Unit
- Modular Base Station Equipment
- Standalone AU-A/ENI Access Unit
- Other Items Required for Installation
- Guidelines for Selection of Equipment Locations
- Installing the Outdoor Unit
- Installing the SU-NI and AU-NI Indoor Unit
- Installing Modular Base Station Equipment
- Installing the GU-A-BS GPS and Alarms System
- Chapter 2 - Indoor SU-R Units
- Chapter 3 - Indoor SU-I and AU-I Units
- Book 3: Commissioning
- Book 4: Operations and Administration
- Contents
- Chapter 1 - Accessing the Monitor Program
- Chapter 2 - Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Traffic Statistics (AU and SU)
- Voice Statistics (SU with Voice Support Only)
- Per Hop Statistics (AU and SU)
- Ping Test (AU, SU and GU)
- Continuous Link Quality Display (Available in SU Only)
- MAC Address Database (Available in AU Only)
- Per-rate Counters (AU and SU)
- RSSI Display Option (AU and SU)
- ATPC Counter (AU and SU)
- AU Alarms (IF-based AU Only)
- Advanced Configuration Menu
- IP Parameters (AU, SU and GU)
- Air Interface Parameters (AU and SU)
- Network Management Parameters (AU, SU and GU)
- Bridge Parameters (AU, SU and GU)
- Performance Parameters (AU and SU)
- Service Parameters (AU and SU)
- RADIUS Parameters Menu (Subscriber Units only)
- Security Parameters (AU and SU)
- Voice Parameters (Subscriber Units with Voice Support Only)
- Dialing Parameters (Subscriber Units with Voice Support Only)
- Telephony Signals (Subscriber Units with Voice Support Only)
- Hopping Parameters (GU)
- Alarm Parameters (GU)
- Appendices
- Appendix A - Configuration Download/Upload
- Appendix B: Software Version Loading Procedure
- Appendix C: Supported MIBs and Traps
- BreezeACCESS System Object Identifiers
- brzAccessMIB
- Service Parameters
- RADIUS General Parameters
- Accounting Parameters
- RADIUS Authentication Parameters
- User Filtering Parameters
- Network Management Parameters
- Bridge Parameters
- Air Interface Parameters
- Performance Parameters
- Site Survey Parameters
- Special Operations Parameters
- Unit Control Parameters
- IP Parameters
- System Information Parameters
- Alarms Parameters
- brzPhoneMIB (applicable to SU with voice only)
- Supported Traps
- Appendix D: RSSI to dBm Conversion Table
- Appendix E: Parameters List
- Appendix F: Hopping Sequences
- Index
Menus and Parameters
2-81
BreezeACCESS Version 4.3 System Manual
Table 2-13: Ethernet Vendor Specific Record Structure
(Vendor Specific ID is 710)
Security Parameters (AU and SU)
Unauthorized wireless connection is prevented by using the Wired
Equivalent Privacy (WEP) algorithm defined in the IEEE 802.11 Wireless
LAN standard. The WEP is based on RSA’s RC4 encryption algorithm.
The following parameters are available in the Security Parameters menu:
Authentication Algorithm – Determines the operation mode of the
unit. The available options are:
Open System: An SU configured to Open System can be
authenticated only by an AU that is also configured to Open
System. The WEP algorithm is not used.
Field Format Description
Traffic Type 1 hexadecimal digit Data (0)/Management (1)/Voice (2).
VLAN ID 3 hexadecimal digits VLAN ID.
Layer 3
Protocol
4 hexadecimal digits Third layer protocol type (IP, ARP).
Remote IP
Address
xxx.xxx.xxx.xxx (decimal
format)
The remote IP Address.
IP Type Of
Service
2 hexadecimal digits Precedence/ Delay/ Throughput/ Reliability.
VLAN Priority 1 hexadecimal digits VLAN Priority.
ETH Output
Octets
8 hexadecimal characters Number of octets successfully transmitted to
Ethernet.
ETH Input
Octets
8 hexadecimal characters Number of octets received from Ethernet.
ETH Output
Packets
8 hexadecimal characters Number of packets successfully transmitted
to Ethernet.
ETH Input
Packets
8 hexadecimal characters Number of packets received from Ethernet.
WLAN Output
Octets
8 hexadecimal characters Number of octets successfully transmitted to
Wireless.
WLAN Input
Octets
8 hexadecimal characters Number of octets received from Wireless.
WLAN Output
Packets
8 hexadecimal characters Number of packets successfully transmitted
to Wireless.
WLAN Input
Packets
8 hexadecimal characters Number of packets received from Wireless.