User's Manual

2-80
BreezeACCESS Version 4.3 Operations and Administration
Manual Revision: 3.0
Server Accounting IP Address is configured to an address other
than 0.0.0.0., the SU enables the RADIUS accounting client.
The default is Disable.
 RADIUS Server Accounting IP Address –To define the IP address
of the RADIUS server to be used for accounting.
The default address is 0.0.0.0 (none).
 RADIUS Server Accounting Port – Specifies the UDP port number
used by the Radius server for accounting.
Valid values are 1000 to 65535.
The default value is 1813 (RFC requirement).
 Accounting Interval – Specifies the interval in seconds between
two consecutive transmissions of accounting records.
Valid values are from 60 to 6000 seconds (1 to 100 minutes).
The default value is 90 seconds.
 Show Accounting Parameters – Displays the current values of the
Accounting parameters.
RADIUS Record Structure
Each RADIUS Accounting message includes a Session ID and up to 11
Ethernet Specific records. A space is used to separate fields from each
other.
Table 2-12: Session ID Structure
Field Format Description
Unit Name 16 ASCII characters (no
nulls).
The Unit name
Unit MAC Address xx-xx-xx-xx-xx-xx (hex
format)
The IEEE MAC address of the SU.
Message
ID 4 hex digits The Message ID
Reset Counters 2 hex digits (0-99) The number of resets since power-up of the
unit.