System Manual

Frequencies Selection and Basic Sequence
Generation Using the Flexible Hopping
Definition Menu
The Flexible Hopping Definition menu includes the following options:
Add Frequencies
The Add Frequencies option enables defining a new list of sub-bands and/or
discrete frequencies. Enter a list of the required sub-bands and/or
frequencies, using either sub-bands (f1-f2) or discrete frequencies, e.g. 2402-
2412,2448,2470-2480. Use a comma to separate between entries, do not
use spaces.
The usable center frequencies are from 2402 to 2480, using a 1 MHz
resolution (2402,2403,2404 … 2480).
The new selected set of frequencies (frequencies to be used) will become
effective only after the next reset.
Remove Frequencies
The Remove Frequencies option enables removing previously defined sub-
bands and/or discrete frequencies. Enter a list of the required sub-bands
and/or frequencies to remove, using either sub-bands (f1-f2) or discrete
frequencies, e.g. 2402-2412,2448. Use a comma to separate between
entries, do not use spaces.
Erase All
The Erase All option enables erasing all previously defined sub-bands
and/or discrete frequencies. Enter option selection 1- Erase All.