User's Manual
Table Of Contents
- BreezeMAX PRO 5000 CPE
- About This Manual
- Contents
- Figures
- Tables
- Products Description
- Installation
- Commissioning
- Operation
- 4.1 Introduction to SU Management
- 4.2 Accessing the Web Configuration Server
- 4.3 Using the Web Configuration Server
- 4.4 Show All
- 4.5 Unit Control Parameters
- 4.6 Registration Parameters
- 4.7 BST/AU Parameters
- 4.8 Radio Parameters
- 4.9 ATPC Parameters
- 4.10 Performance Monitor
- 4.11 Service Parameters
- 4.12 Management Parameters
- 4.13 Logout
- 4.14 Parameters Summary
- Troubleshooting
- Glossary
Chapter 4 - Operation Parameters Summary
BreezeMAX PRO 5000 CPE 82 Product Manual
Authentication
Not Authenticated
EAP TTLS
EAP TLS
EAP TTLS Yes
BS ID Parameters
BST/AU ID 6 octets of up to 3 digits each.
Each group range is 0-255.
0.0.0.0.0.0 Yes
BST/AU ID Mask 6 octets of up to 3 digits each.
Each group range is 0-255.
0.0.0.0.0.0 Yes
Preferred BST/AU ID 6 octets of up to 3 digits each.
Each group range is 0-255.
0.0.0.0.0.0 Yes
Preferred BS ID Mask 6 octets of up to 3 digits each.
Each group range is 0-255.
0.0.0.0.0.0 Yes
Mobility Mode
Nomadic
Mobile
Nomadic Yes
Radio Parameters
Start Rx Frequency (KHz) 5400000 to 5950000
Resolution for all bands is
0.125 MHz
5400000 Yes
(after Update
Scanning Table)
End Rx Frequency (KHz) 5400000 to 5950000
Resolution for all bands is
0.125 MHz
5950000 Yes
(after Update
Scanning Table)
Scanning Main Step (MHz)
2.5 MHz
5 MHz
2.5 MHz Yes
(after Update
Scanning Table)
Set Bandwidth to Scan
5 MHz
10 MHz
Auto
Auto Yes
Multirate and ATPC Parameters
ATPC
Enable
Disable
Enable Yes
Table 4-3: SU Parameters Summary
Parameter Range Default Run-Time
Updated