User's Manual
Table Of Contents
- BreezeMAX PRO 5000 CPE
- About This Manual
- Contents
- Figures
- Tables
- Products Description
- Installation
- Commissioning
- Operation
- 4.1 Introduction to SU Management
- 4.2 Accessing the Web Configuration Server
- 4.3 Using the Web Configuration Server
- 4.4 Show All
- 4.5 Unit Control Parameters
- 4.6 Registration Parameters
- 4.7 BST/AU Parameters
- 4.8 Radio Parameters
- 4.9 ATPC Parameters
- 4.10 Performance Monitor
- 4.11 Service Parameters
- 4.12 Management Parameters
- 4.13 Logout
- 4.14 Parameters Summary
- Troubleshooting
- Glossary
Chapter 4 - Operation BST/AU Parameters
BreezeMAX PRO 5000 CPE 63 Product Manual
» Current Best BS ID
» Selected Best BS ID
» Preferred Best BS ID
» Current Preferred BS ID
Selected BST/AU Parameters:
» Selected BST/AU ID: The BST/AU ID to which the CPE is currently
connected.
» Selected Rx Frequency: The Rx Frequency of the BTS to which the CPE is
currently connected.
» Selected Best BS RSSI: The Rx RSSI of the BTS to which the CPE is
currently connected.
» Selected Best BS SNR (dB): The Rx SNR of the BTS to which the CPE is
currently connected.
» Selected BW: The bandwidth of the BTS to which the CPE is currently
connected.
Best BST/AU Table: displays the following details for each of the BS(s) found
during the scanning process:
» BS ID
» Rx Frequency (KHz)
» SNR (dB)
» RSSI (dBm)
» Bandwidth
BST/AU and Preferred BST/AU Parameters
» BST/AU ID
» BST/AU ID Mask
» Preferred BST/AU ID