User's Manual
Table Of Contents
- BreezeMAX PRO 5000 CPE
- About This Manual
- Contents
- Figures
- Tables
- Products Description
- Installation
- Commissioning
- Operation
- 4.1 Introduction to SU Management
- 4.2 Accessing the Web Configuration Server
- 4.3 Using the Web Configuration Server
- 4.4 Show All
- 4.5 Unit Control Parameters
- 4.6 Registration Parameters
- 4.7 BST/AU Parameters
- 4.8 Radio Parameters
- 4.9 ATPC Parameters
- 4.10 Performance Monitor
- 4.11 Service Parameters
- 4.12 Management Parameters
- 4.13 Logout
- 4.14 Parameters Summary
- Troubleshooting
- Glossary
Chapter 4 - Operation Unit Control Parameters
BreezeMAX PRO 5000 CPE 46 Product Manual
4.5 Unit Control Parameters
The Unit Control menu includes the following options:
Show
Reset Unit
Change Password
SW Versions Control
Configuration Control
TM/PM Files Control
Ethernet Op Mode
4.5.1 Show
Select this option to view the current values/selected option of applicable
parameters as well as general status information, as follows:
HW Details
» SU Type: CPE Pro SQ
» CPE Family: Describes the primary chipset of the CPE: Sequans
» Serial Number: Describes the serial number of the CPE unit. This number
can be used to determine the identity of the subscriber unit by the BTS
operator.
» MAC Address: This is the unit’s LAN MAC address. The WAN MAC address
is the displayed address +1.
» MAC Address Control Number (a number computed from the MAC Address
that can be used for verification purposes)
» Radio Band: Describes the radio band in use (currently only 5 GHz).
» HW Version: The version of the digital module