User's Manual

Chapter 4 - Operation Introduction to SU Management
BreezeMAX PRO 5000 CPE 42 Product Manual
4.1 Introduction to SU Management
The units support the TR-069 CPE WAN Management Protocol (CWMP), allowing
efficient management by an Auto Configuration Server (ACS).
In addition, configuration and performance monitoring of a single unit can be
performed either locally (via the Ethernet port) or remotely using any of the
following options:
 Using a PC/Notebook with an http browser to access the built-in web
configuration server.
 Using TFTP to upload/download a Configuration File.
For local management, the management IP address is 192.168.254.251 with
subnet mask 255.255.255.0.
Remote (over the air) management is done using a WAN management IP address
acquired from a DHCP server as a part of the Network Entry process. The DHCP
server should supply also the IP address of the ACS management station. Remote
management service is always in IP CS service mode (even if the unit uses
Ethernet CS for regular services). In the uplink, the DSCP value of management
packets sent by the unit can be configured only by the remote management
system using TR-069 (the default is 6). In downlink management packets the
DSCP value is ignored.
The Web Configuration Server enables the configuration of all SU parameters
using a Notebook/PC with a web browser. It also enables downloading of SW files,
control of the running SW version, and downloading/uploading of the
configuration file, enabling simplified and faster configuration process.
The Web Configuration Server also provides a selection of performance monitoring
capabilities, allowing installers and technicians to view information on link quality
and traffic counters. These monitoring capabilities enable performance
verification and problems identification.
To further support local testing, the program also enables temporary control of the
ATPC mechanism.