User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
72 Extreme CPE Product Manual
Chapter 6 - Registration
6.3 Registration Configuration
The User Registration page allows the user to define registration parameters such
as configured user name, password, organisation and the country of operation of
the Extreme CPE. It also allows the user to select the authentication method.
Figure 6-21: Registration - User Registration Configuration
USER REGISTRATION – Allows the user to enter information on the
authentication parameters required to support provisioning on the unit.
User Name – Allows the user to enter a user name for the unit, in the form
someone@WiMAX.com.
Password – Allows the user to set a password for registration purposes.
Password Confirm – Prompts the user to re-enter the password.
Organization – Enter the WiMAX subscriber name.
Address – Enter the contact information for the WiMAX subscriber.
Country – Enter the country of operation.
Authentication – Allows the user to describe the method of authentication
being used to secure the WiMAX connection. (Options: none; EAP TTLS; EAP
TLS)