User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
Configuration Control
Extreme CPE Product Manual 65
5.6 Configuration Control
The Configuration Control page allows you to specify an IP address from which to
upload or download a running configuration file. It also allows you to restore the
factory default TFTP server address.
Figure 5-16: Unit Control - Configuration Control
CONFIGURATION CONTROL – Use the configuration control page to transfer
running configuration files.
Configuration Upload File Name – Allows the user to specify the
configuration upload file name for copying to the TFTP server.
Configuration Download File Name – Allows the user to specify the
configuration download file name for downloading from the TFTP server.
TFTP Server IP Address – Specifies a TFTP server IP address for
upload/download.
Chose upload/download – Selects to either upload to, or download from the
specified TFTP server.
Action – Performs the selected upload or download procedure.
Refresh – Reloads the page and the parameters associated with it.
Set Factory Defaults – Resets the factory default configuration file path
settings from the TFTP server to the Extreme CPE.