User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
Show Unit Control
Extreme CPE Product Manual 59
SW Boot Version – Describes the current software boot version file.
Main SW File Name – Describes the name of the current firmware.
Main SW Version – Describes the version of the current firmware.
Shadow SW File Name – Describes the name of the secondary, or shadow,
firmware file.
Shadow SW Version – Describes the version of the shadow firmware file.
Running From – Describes the firmware file being used by the Extreme CPE
as a running configuration. (Options: Main, or Shadow)
TFTP Server IP address(for SW download) – Describes the TFTP server IP
address that is being used for firmware download.
SW File Name – Describes the name of the download firmware file from the
TFTP server.
Configuration File Upload Name – Describes the name of the uploaded
configuration file.
Configuration File Download Name – Describes the name of the current
configuration file.
List of TM&PM Files Gathered – Describes the TM (Traffic Monitoring) and
PM (Performance Monitoring) files that the unit has detected.