User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
52 Extreme CPE Product Manual
Chapter 4 - System Settings
Figure 4-5: Show All - License Type
LICENSE TYPE – Describes the availability of VoIP ports, operator preset
maximum information rates (MIR), Ethernet status, virtual private networks (VPN)
status and switching antenna status.
POTS1/2 – Describes the availability status of the VoIP plain old telephone
service (POTS) ports. ‘Available’ indicates that the specified VoIP port is open
for use.
MIR=2Mbps – Describes the operator preset maximum information rate (MIR)
state per subscriber at 2Mbps upload/download.
MIR=6Mbps – Describes the operator preset maximum information rate (MIR)
state per subscriber at 6Mbps upload/download.
Unlimited MIR – Describes if the operator preset maximum information rate
(MIR) is unlimited in upload/download bandwidth, or unavailable to the
subscriber.
Ethernet CS – Describes the Ethernet convergence sublayer (CS) status.
VPN over IP CS – Describes the status of the virtual private network (VPN)
over internet protocol (IP) convergence sublayer.
Switching Antenna – Describes the status of the switching antenna.
Figure 4-6: Show All - Best BSID