User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
System Status
Extreme CPE Product Manual 51
Operation Mode – Describes the operation mode of the Extreme CPE, either
IPCS or ETHCS where IPCS refers to transparent delivery of IPv4 packets and
ETHCS refers to transparent delivery of tagged 802.3 packets over Ethernet.
Unit Status – Describes the connectivity status of the Extreme CPE to the
base station.
SW Boot Version – Describes the current software boot version file.
Main SW File Name – Describes the name of the current firmware.
Main SW Version – Describes the version of the current firmware.
Shadow SW File Name – Describes the name of the secondary, or shadow,
firmware file.
Shadow SW Version – Describes the version of the shadow firmware file.
Running From – Describes the firmware file being used by the Extreme CPE
as a running configuration. (Options: Main, or Shadow)
TFTP Server IP address(for SW download) – Describes the TFTP server IP
address that is being used for firmware download.
SW File Name – Describes the name of the download firmware file from the
TFTP server.
Configuration File Upload Name – Describes the name of the uploaded
configuration file.
Configuration File Download Name – Describes the name of the current
configuration file.
List of TM&PM Files Gathered – Describes the TM (Traffic Monitoring) and
PM (Performance Monitoring) files that the unit has detected.