User Manual

ODU Cable Connection
Extreme CPE Product Manual 31
5 Seal the IDU COM connector using tar seal or weatherproof tape to protect
against rain and moisture.
6 Route the Ethernet cable from the ODU to the IDU following your cable plan
and connect it to the ODU port on the IDU. The RJ-45 port LED on the IDU
should turn on to indicate a valid link.
The sequence of inserting the RJ-45 cable into the ODU and the supplied ODU
components are described in the following diagram.
7 Insert the sealing cover into the port to ensure protection against moisture.
NOTE
Connecting the propriety Ethernet cable to the IDU powers on the ODU.
RJ-45 cable
Rubber sealing
cap
Plastic crimp
Internal sealing
chamber
Screw-off
external chamber
RJ-45 port