User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
Specifications
Extreme CPE Product Manual 7
1.2.6 Electrical
The Extreme CPE provides two types of power supply with charger and without
charger capability. The charger provides optional battery backup features for
areas that have no PSTN service but do need to comply with emergency laws for
VoIP service. The backup battery supply is not available in this release.
1.2.7 Environmental IDU
1.2.8 Environmental ODU
Table 1-7: Electrical Specifications
Type Details
AC Power Supply
Input: 100-240 VAC, 50-60 Hz, maximum power consumption 0.5A
Output: 55 VDC, maximum power consumption 1A
MTBF 200,000 hrs
Bellcore SR332
Table 1-8: Environmental Specifications
Item Details
Operating Temperature
-5ºC to 45ºC
Storage Temperature
-40 to 75 °C
Humidity
Maximum 95%, non-condensing.
Table 1-9: Environmental Specifications
Item Details
Operating Temperature
-40ºC to 55ºC
Storage Temperature
-40 to 70 °C
Humidity
Maximum 95%, non-condensing.
Rain
IEC 68-2-18 method 2.2
Random Vibration
IEC 68-2-64
Shock
IEC-68-2-29
Salt Fog
IEC-68-2-11
Ice Loading
25mm radial ice density 7kN/m3
Solar Radiation
IEC-68-2-5, MIL-STD-810D
Wind Speed
160Km/Hr required for antenna stability under operation