User Manual
Table Of Contents
- About This Manual
- Contents
- Chapter 1 - Product Description
- Chapter 2 - Hardware Installation
- Chapter 3 - Initial Configuration
- Chapter 4 - System Settings
- Chapter 5 - Unit Control
- Chapter 6 - Registration
- Chapter 7 - Base Station Scanning
- Chapter 8 - Radio Parameters
- Chapter 9 - ATPC
- Chapter 10 - Performance Monitor
- Chapter 11 - Service
- Chapter 12 - Management
- Chapter 13 - Logout
- Appendix A - Troubleshooting
- Appendix B - GNU License
- Glossary
Introducing the Extreme CPE range
Extreme CPE Product Manual 3
1.1.1 The Extreme CPE range of products
The following table lists the available Extreme CPE models:
The Extreme CPE offers a user-friendly web-based management interface for the
configuration of all the unit’s features. Any PC directly attached to the unit can
access the management interface using a web browser, such as Internet Explorer
(version 6.0 or above) or Firefox (version 1.5 or above).
The initial configuration steps can be made through the web browser interface
using the Setup Wizard. It is recommended to make the initial changes by
connecting a PC directly to one of the Extreme’s LAN ports.
Table 1-1: Extreme CPE Range of Models
Frequency
Band
Model Number Description
2.3 GHz
1 RJ-45 data port
1 RJ-45 data port and 2 RJ-11 VoIP ports
2.5 GHz 1 RJ-45 data port
1 RJ-45 data port and 2 RJ-11 VoIP ports
3.5 GHz 1 RJ-45 data port
1 RJ-45 data port and 2 RJ-11 VoIP ports
5 GHz 1 RJ-45 data port
1 RJ-45 data port and 2 RJ-11 VoIP ports