User Manual

100 Extreme CPE Product Manual
Chapter 10 - Performance Monitor
 DL Median RSSI (dBm) – Displays the downlink Receive Signal Strength
Indicator for the selected time period.
 Median Rx Rate – Displays the average number of received data packets in
Megabits per second for the selected time period.
 Last Rx Rate – Displays the last 1 or 15 minutes of received data, depending
on the configuiration of the Integration Time settings, in Megabits per second
for the selected time period.
 Maximum Rx Rate – Displays the maximum received data rate in Megabits
per second, for the selected time period.
 Minimum Rx Rate – Displays the minimum received data rate in Megabits per
second, for the selected time period.
 UL SNR (dB) – Displays the median level of Signal-to-Noise Ratio received by
the base station from the Extreme CPE, for the selected time period.
 UL RSSI (dBm) – Displays the median level of Receive Signal Strength
Indication that the base station detects from the Extreme CPE, for the selected
time period.
 Median Tx Rate – Displays the average number of data packets transmitted in
Megabits per second, for the selected time period.
 Last Tx Rate – Displays the last 1 or 15 minutes of data packets transmitted
in Megabits per second. The frequency for this parameter can be set on the
Integration Time page.
 Maximum Tx Rate – Displays the maximum rate of data transfer for the
selected time period.
 Minimum Tx Rate – Displays the minimum rate of data transfer for the
selected time period.
 Apply – Applies the Ethernet Historical Counter setting and saves it.