User Manual

76 Extreme CPE Product Manual
Chapter 7 - Base Station Scanning
Figure 7-24: BST/AU - Selected BST/AU Parameters
SELECTED BST/AU PARAMETERS – The Selected BST/AU Parameters page
describes the BSID, frequency, signal strength, noise ratio and identity of the
selected base station.
 Selected BST/AU ID – Describes the configured base station identity, in the
form xx.xx.xx.xx.xx.xx.
 Frequency – Describes the selected receive signal frequency.
 Rx RSSI (dBm) – Describes the receive signal strength indicator of the WiMAX
link, in decibels per milliwatt.
 Rx SNR (dB) – Describes the signal to noise ratio of the WiMAX link, in
decibels.
 Selected Bandwidth – Describes the bandwidth of the WiMAX link.
Figure 7-25: BST/AU - Best BST/AU Table
BEST BST/AU TABLE – The Best BST/AU Table describes the optimal base
station identity, frequency, signal to noise ratio and bandwidth of the selected
base station.
 BS ID – Describes the optimal base station identity (BSID).
 Rx Frequency (MHz) – Describes the optimal base station receive frequency
for the WiMAX link, in megahertz.
 SNR(dB) – Describes the optimal signal to noise ratio of the WiMAX link, in
decibels.