User's Manual
Table Of Contents
- BreezeMAX PRO 5000 CPE Product Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - Product Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation
- 4.1 Introduction to CPE Management
- 4.2 Accessing the Web Configuration Server
- 4.3 Using the Web Configuration Server
- 4.4 Show All
- 4.5 Unit Control Parameters
- 4.6 Registration Parameters
- 4.7 BST/AU Parameters
- 4.8 Radio Parameters
- 4.9 ATPC Parameters
- 4.10 Performance Monitor
- 4.11 Service Parameters
- 4.12 Management Parameters
- 4.13 Logout
- 4.14 Parameters Summary
- Appendix A - Troubleshooting
- Glossary
Chapter 4 - Operation ATPC Parameters
BreezeMAX PRO 5000 CPE 74 Product Manual
Selecting from a set of default country codes that appear in the ATPC window
as described below.
Uploading a country codes file as described in the Configuration Control (see
“Configuration Control” on page 53.
The Current Country Code Data field displays the country code that is currently
used. After performing reset to the unit, the configured country code becomes the
current country code.
The following are the available country codes:
Table 4-2: Country Codes
Country Code Frequency Range (MHz)
4.9 GHz Universal 4900-5350
4.9 GHz FCC 4940-4990
4.9 GHz Japan A 4900-5000
4.9 GHz Japan B 5030-5091
5.3 GHz ETSI 5150-5350
5.2 GHz ETSI 5150-5350
5.2 GHz FCC 5150-5350
5.3 GHz FCC 5250-5350
5.1-5.3 GHz FCC 5150-5350
5.1 GHz FAA 5090-5150
5.4 GHz Universal 5470-5900
5.9 GHz Universal 5900-5950
5.4 GHz ETSI 5470-5725
5.8 GHz ETSI 5725-5875
5.4 GHz FCC 5470-5725
5.8 GHz FCC 5725-5875
5.4 GHz Australia A 5490-5585
5.4 GHz Australia B 5655-5725
5.8 GHz Australia 5730-5840
5.8 GHz UK 5725-5845