User's Manual

Chapter 2 - Installation Installing the IDU-1D Indoor Unit of the CPE
BreezeMAX PRO 5000 CPE 25 Product Manual
* After power-up, the WIRELESS LED illuminates until self-test is finished.
The CPE IDU-1D includes a recessed RESET button located on the front panel of
the unit. When pressed, power to the ODU is disconnected (hard reset).
RADIO
(on the front panel)
10/100Base-T (RJ-45) Connection to the ODU
POWER
(on the bottom panel)
3-pin AC Mains power connection
Table 2-5: CPE-IDU-1D LEDs
Name Description Functionality
POWER (3) Power Indication
 Off - IDU is not powered or power failed
 Green - IDU power is OK
ETH (2) Ethernet link status
(Ethernet integrity)
 Off - No Ethernet connectivity has been detected between
the outdoor unit and the device connected to the indoor
unit’s data port
 Green - Ethernet connectivity has been detected between
the outdoor unit and the device connected to the indoor
unit’s data port
WIRELESS (1) Wireless link status
 Off - SU is not associated with a BS
 Green - SU is connected with a BS (network entry
completed)
 Blinking Green - Authentication failed
Table 2-4: CPE-IDU-1D Connectors
Name Connector Functionality