User Manual
Table Of Contents
- BreezeMAX PRO 5000 CPE Product Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - Product Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation
- 4.1 Introduction to SU Management
- 4.2 Accessing the Web Configuration Server
- 4.3 Using the Web Configuration Server
- 4.4 Show All
- 4.5 Unit Control Parameters
- 4.6 Registration Parameters
- 4.7 BST/AU Parameters
- 4.8 Radio Parameters
- 4.9 ATPC Parameters
- 4.10 Performance Monitor
- 4.11 Service Parameters
- 4.12 Management Parameters
- 4.13 Logout
- 4.14 Parameters Summary
- Appendix A - Troubleshooting
- Glossary
Chapter 4 - Operation ATPC Parameters
BreezeMAX PRO 5000 CPE 73 Product Manual
Select the required country code from the list and reset the unit to apply the new
country code.
The Current Country Code field displays the country code that is currently used.
After performing reset to the unit, the configured country code becomes the
current country code.
The following are the available country codes:
To select a country code:
IMPORTANT
The selected Country Code must comply with applicable local radio regulations.
The selected Country Code may affect the maximum Tx power and also the system performance.
Table 4-2: Country Codes
Country Code Frequency Range (MHz)
4.9 GHz Universal 4900-5350
4.9 GHz FCC 4940-4990
4.9 GHz Japan A 4900-5000
4.9 GHz Japan B 5030-5091
5.3 GHz ETSI 5150-5350
5.2 GHz ETSI 5150-5350
5.2 GHz FCC 5150-5350
5.3 GHz FCC 5250-5350
5.1-5.3 GHz FCC 5150-5350
5.1 GHz FAA 5090-5150
5.4 GHz Universal 5470-5900
5.9 GHz Universal 5900-5950
5.4 GHz ETSI 5470-5725
5.8 GHz ETSI 5725-5875
5.4 GHz FCC 5470-5725
5.8 GHz FCC 5725-5875
5.4 GHz Australia A 5490-5585
5.4 GHz Australia B 5655-5725