User's Manual

Chapter 4 - Operation and Administration ASN-GW Menu
BreezeMAX Extreme 118 System Manual
4.6.2.9.6 VLAN ID
In IP CS applicable only if VLAN Interface is set to Enable. This is the VLAN ID to
be inserted in packets forwarded to the network (uplink).
The available range is 1-4094 or null (null means untagged).
4.6.2.9.7 VLAN Priority
In IP CS applicable only if VLAN ID is other than None (untagged). The VLAN
Priority to be inserted in packets forwarded to the network (uplink).
The available range is from 0 to 7.
4.6.2.9.8 Inner DSCP Marking
The Inner DSCP Marking parameter defines whether to replace in the uplink the
original DSCP value in IP packets with a new value specified by the Inner DSCP
parameter.
The options are Disable (no change in DSCP values) or Enable.
4.6.2.9.9 Inner DSCP
The Inner DSCP parameter is applicable only if Inner DSCP Marking is set to
Enable. It specifies the DSCP value that will replace in IP packets the original
value in the uplink.
The range is from 0 to 63.
4.6.2.10 Forwarding Rules
The Forwarding Rule includes the features that affect the wireless broadcast
domain.
The Forwarding Rule menu enables viewing all Forwarding Rules in the database,
defining new Forwarding Rules, editing details of existing Forwarding Rules and
removing Forwarding Rules from the database.
Up to 10 different Forwarding Rules can be defined.
Each Forwarding Rule includes the following parameters:
4.6.2.10.1 Forwarding Rule ID
This is an auto-sequential number from 1 to a maximum of 10, generated
automatically during creation of a new Forwarding Rule.
NOTE
Any VLAN ID (including None for untagged) can be defined only in a single Service Interface: This
includes the values configured for the VLAN ID parameter and valuess in VLAN Lists. The
Management VLAN cannot be configured.