User's Manual

Chapter 4 - Operation and Administration Sector Menu
BreezeMAX Extreme 164 System Manual
For Dual Sector Dual BS no Diversity Operation Mode the supported options are 5
MHz, 7 MHz (3.x GHz units only), and 10 MHz.
For 1SIS units using Single Sector Single BS no Diversity operation mode and
1DIV units using Single Sector Single BS with Diversity operation modes the
supported options are 5 MHz, 7 MHz (3.x GHz units only), and 10 MHz.
For 1SIS units using Single Sector Dual BS no Diversity operation mode and 1DIV
units using Single Sector Dual BS with Diversity operation modes (applicable only
if a license for 20 MHz is installed), the supported options are 14 MHz (3.x GHz
units only), and 20 MHz. This is achieved by using two adjacent radio channels,
where each channel has a bandwidth of 10 MHz (for a Sector Bandwidth of 20
MHz) or (in 3.x GHz units only) 7 MHz (for a Sector Bandwidth of 14 MHz).
The default Bandwidth is 10 MHz.
4.7.2.2.1.5 Frequency
The central frequency of the sector in MHz. The available range and default
depend on the frequency band supported by the hardware, the selected Country
Code, and the selected bandwidth.
As a general rule, the configurable frequencies are from the Minimum Frequency
+ 1/2 Sector Bandwidth up to a maximum of the Maximum Frequency - 1/2
Sector Bandwidth. However, for certain bands in 4.9 GHz, 5.4 GHz and 5.4 GHz
FCC units different rules apply, as shown in tables 4-19, 4-20 and 4-21 below.
The frequency resolution for 3.x GHz units is 0.125 MHz.
In 4.9 GHz, 5.4 GHz and 5.4 GHz FCC units, the frequency resolution is 2.5 MHz
for a Sector Bandwidth of 5 MHz, 5 MHz for a Sector Bandwidth of 10 MHz or 20
MHz.
In the current release the available frequency ranges (Minimum Frequency to
Maximum Frequency) are:
Table 4-17: Frequency Configuration, 3.65 GHz Units
Country Code Frequency Range
Canada 3650-3675 MHz
FCC 3650-3675 MHz
Table 4-18: Frequency Configuration, 3.6 GHz Units
Country Code Frequency Range
Universal 3600-3800 MHz