User's Manual

Chapter 4 - Operation and Administration ASN-GW Menu
BreezeMAX Extreme 138 System Manual
B Define VLAN ID or VLAN Priority classifiers (to support separation of different
services such as VoIP and Data over PPPoE).
For all other Service Rules, at least one Classifier must be assigned to each
Service Rule, up to a maximum of five Classifiers per Service Rule. For details
refer to Classifiers (Section 4.6.2.8) below.
When either defining a new Service Rule and its components or updating an
existing one, note that a Multiple Service Flow can include a maximum of one
Service Rule with a Classifier of type Any.
The Service Rule basic parameters are:
 Service Rule ID
 Service Interface Name
4.6.2.7.1 Service Rule ID
This is an auto-sequential number from 1 to a maximum of 4, generated
automatically during creation of a new Service Rule for a specific Multiple Service
Flow.
4.6.2.7.2 Service Interface Name
The Name of the Service Interface associated with the Service Rule. Must be one of
the previously defined Service Interfaces that exists in the database. An Ethernet
CS Service Interface can be associated only to a Multiple Service Flow with a
Bridge Service Operation Mode.
4.6.2.8 Classifiers
The Classifiers submenu option for a selected Service Rule enables managing the
Classifier(s) assigned to the Service Rule. For Service Rules of a Multiple Service
Flow assigned to a PPPoE Service, only one of the following options should be
used:
A No classifier is defined, or
B Define VLAN ID or VLAN Priority classifiers (to support separation of different
services such as VoIP and Data over PPPoE).
For all other Service Rules, at least one Classifier must be assigned to each
Service Rule, up to a maximum of five Classifiers per Service Rule.
Note the following rules when either defining a new Classifier or updating an
existing one: