User's Manual

Chapter 4 - Operation and Administration ASN-GW Menu
BreezeMAX Extreme 129 System Manual
Valid values: 1 to 65535.
The default value is 1813 (RFC 2866 requirement).
The UDP Port Number of an existing server cannot be modified (to change it you
must first delete the server).
4.6.2 Services Menu
4.6.2.1 Introduction
Services are logical entities residing on the ASN to ensure end to end connectivity
based on QoS, forwarding rules and classifiers. Services should be defined from
bottom up, using the following order:
1 Forwarding Rule: Defines the behavior in the wireless broadcast domain.
2 Service Interface: Defines the parameters that affect connectivity between the
BTS and the backbone.
3 Service Group: Defines the connectivity and functionality of operating with
external elements (DHCP Server, AAA Server).
4 Multiple Service Flow: Defines the flow classification and prioritization over the
wireless link.
5 Service Profile: Defines the QoS part of a generic service contract between an
operator and a subscriber.
6 MS Service (applicable only for local authentication): Defines the provisioning
of a Service (a pair of one Service Profile and one Multiple Service Flow) to a
specific MS.
The system is supplied with a set of default service components to support typical
Management, IP CS Data and Ethernet CS Data services (see “MSs Default
Services” on page 152).
4.6.2.2 Common Operations in Services Menus
The menu options available in the Services menu enable viewing, editing, deleting
and adding applicable entities, such as Service Profiles, QoS Profiles, etc.
Some or all of the following options are available in the Services menus:
 Show Summary: Select this option to see the current details of all entities in
the applicable menu.