User's Manual

Chapter 4 - Operation and Administration BTS Menu
BreezeMAX Extreme 115 System Manual
The available options are All, Alarm, State Status Change, Configuration Change
Event, System Event.
The default is All.
4.5.6.4 Show Event Log Table By Selection Criteria
Select this option to display details of all events that meet the defined filtering
criteria (see “Event Log Selection Criteria” on page 114). For each event, the
following details are displayed:
 Seq#: The sequential identification number of the event (trap).
 Time: The Time and Date at which the event was generated.
 ID & Name
 MO Type & Instance: The Type and Instance (ID number) of the applicable
Managed Object.
 Event Category
 Event Type: The type of event (first level of event description).
 Probable Cause: The probable cause of the event (second level of event
description, applicable only for Alarm events).
 Specific Problem: The specific problem that caused the event (third level of
event description, applicable only for Alarm events).
 Event/Alarm Severity: The defined severity of the Event.
 Object Severity: The combined events severity for the Managed Object at the
time at which the event was generated.
 Group OID Name: Applicable only for Configuration Change event. Indication
of the changed parameter or the group of parameters where a change
occurred.
4.5.6.5 Show All Event Log Table
Select this option to display all events logged in the device without any filtering.
The displayed details are the same as for “Show Event Log Table By Selection
Criteria” on page 115.