Installation Manual
Table Of Contents
- Cover
- 01_Description
- 02_Installation
Chapter 2 - Installation Mounting the BTS
BreezeMAX Extreme 53 System Manual
2.3.2 Installing the BTS on a 2” - 4” Mast
Using a carriage with tilt extension and heavy duty metal clamps
1 Open the packaging and remove the BTS and screws.
2 Thread the four threaded rods through the carriage and the clamps.
3 Attach the carriage and the clamps to the mast and tighten on both sides
using the supplied washers, spring washers and nuts.
Figure 2-2: Tilt Extension Bracket Installed on BTS