User Manual

Chapter 4 - Operation and Administration GPS Menu
BreezeMAX Extreme 163 System Manual
 External 10 MHz Clock
For details refer to “Clock Parameters” on page 166.
GPS Info Parameters
The GPS Info Parameters include read-only information received from the GPS
receiver (when available).
 Number Of Received Satellites: The number of satellites received by the GPS
receiver. For proper operation at least four satellites should be received.
 Longitude: The longitude as calculated by the GPS receiver. The format is
<xxx.yyy A>, where xxx is the longitude in degrees, yyy is in minutes, and A is
either N (North) or S (South).
 Latitude: The latitude as calculated by the GPS receiver. The format is
<xxx.yyy A>, where xxx is the longitude in degrees, yyy is in minutes, and B is
either E (East) or W (West).
 Altitude: The altitude in meters as calculated by the GPS receiver.
 Calculated Local Date and Time: The local date and time (using 24 hours
clock) as calculated using the data received from the GPS receiver and taking
into account the configured Time Zone Offset From UTC and Daylight Saving
parameters.
 Navigation Processor SW Version: The number and date of the GPS Navigation
Processor SW Version.
 Signal Processor SW Version: The number and date of the GPS Signal
Processor SW Version.
 GPS HW Version: The GPS HW Version.
GPS Status
 External 1PPS: The status of External 1PPS clock (OK or Failed).
 External 10MHz: The status of External 16MHz clock (OK or Failed).