User's Manual
Table Of Contents
- BreezeMAX Extreme System Manual
- About This Manual
- Contents
- System Description
- 1.1 About WiMAX
- 1.2 WiMAX Network Architecture
- 1.3 BreezeMAX Extreme
- 1.4 Specifications
- Installation
- 2.1 BTS Installation
- 2.2 GPS Installation
- 2.3 Indoor Power Supply Installation
- 2.4 Cable Connections
- 2.5 External Antennas Connection
- Commissioning
- Operation and Administration
- 4.1 BreezeMAX Extreme System Management
- 4.2 The Monitor Program
- 4.3 IP Addresses Configuration
- 4.4 The Main Menu
- 4.5 BTS Menu
- 4.5.1 Show Summary
- 4.5.2 Show Properties
- 4.5.3 Configuration
- 4.5.4 Unit Control
- 4.5.5 Fault Management
- 4.5.6 Performance Counters
- 4.6 ASN-GW Menu
- 4.7 Sector Menu
- 4.8 BS Menu
- 4.9 Radio Channel Menu
- 4.10 Antenna Menu
- 4.11 GPS Menu
- 4.12 MS Menu
- 4.13 Parameters Summary
- Glossary
Chapter 4 - Operation and Administration Parameters Summary
BreezeMAX Extreme 183 System Manual
Clock Mode
Master
Slave#1
Slave#2
Slave#3
Slave#4
Slave#5
Not configurable in the current release:
only Master is supported (no chaining).
Master No
External 1 PPS Clock
Enable
Disable
Not configurable in the current release.
Master: Disable
Slave: Enable
No
External 10 MHz Clock
Enable
Disable
Not configurable in the current release.
Master: Disable
Slave: Enable
No
MS - Add (applicable only in Embedded Distributed ASN-GW Not Authenticated working mode)
Select MS MAC MAC address Yes
Table 4-20: BTS Parameters Summary
Parameter Range Default Run-Time
Updated