User's Manual

Chapter 4 - Operation and Administration BS Menu
BreezeMAX Extreme 138 System Manual
 BE: VLAN Priority Marking Mode and VLAN Priority Value
For details on VLAN Priority QoS Marking parameters refer to “VLAN Priority QoS
Marking” on page 149.
BS and ASN-GW Keep Alive (applicable only in External ASN-GW Working Mode)
 Keep Alive Support
 Keep Alive Timer (Seconds)
 Keep Alive Interval (Seconds)
 Maximum Number Of Keep Alive Failures
If Keep Alive Support is disabled, other Keep alive parameters will not be
presented. For details on BS and ASN-GW Keep Alive parameters refer to “BS and
ASN-GW Keep Alive” on page 151.
4.8.2 Select
Use this option to select the viewing and configuration mode for a specific BS. The
following options are available for the selected BS:
 Show
 Configuration
 Performance Counters
4.8.2.1 Show
Select this option to view the relevant parameters of the selected BS. The
displayed information is the same as described in Show Summary (Section 4.8.1)
above.
4.8.2.2 Configuration
Select this option to view (Show option) or modify (Update option) the following
parameters of the BS:
 General Parameters