User's Manual

Chapter 4 - Operation and Administration Sector Menu
BreezeMAX Extreme 129 System Manual
transition of the served devices to a new channel. The frequency on which radar
was detected will be considered as Unavailable for a period defined by the
configurable Channel Non Occupancy Period parameter. The unit will switch
randomly to another frequency in the Usable Frequencies List that is not
considered as Unavailable. If this frequency is not considered as Available, the
unit will check for radar activity before initiating transmissions on the new
frequency.
In configurations with two sectors, when the Frequencies Management Level (see
“Frequencies Management Level” on page 80) is set to BTS Level, the frequencies
table of each sector uses also the status information of relevant frequencies in the
frequencies table of the other sector.
The DFS Menu includes the following options:
 Show
 Show Frequencies Status Table
 Update General Parameters
 Usable Frequencies
4.7.2.2.2.1 Show
Select this option to display the following:
 DFS Type: According to the DFS type defined in the Band Name (see “DFS” on
page 79).
 Current DFS Support
 Configured DFS Support
 Current Channel Availability Check Time (sec)
 Configured Channel Availability Check Time (sec)
 Current Channel Non Occupancy Period (min)
 Configured Channel Non Occupancy Period (min)
 Current Startup Test Valid Period (hours)