User's Manual

Chapter 4 - Operation and Administration Sector Menu
BreezeMAX Extreme 124 System Manual
A list of frequencies for the DFS algorithm. Applicable only for units operating in
the 5 GHz bands using a Band Name where DFS is supported. For details refer to
“Usable Frequencies” on page 132.
4.7.2 Select
Use this option to select the viewing and configuration mode for a specific Sector.
The following options are available for the selected Sector:
4.7.2.1 Show
Select this option to view the relevant parameters. The displayed information is
the same as described in Show Summary (Section 4.7.1) above.
4.7.2.2 Configuration
The Configuration menu includes the following options:
 General Parameters
 DFS
4.7.2.2.1 General Parameters
The General Parameters menu enables configuration of the following parameters:
4.7.2.2.1.1 Sector Name
An optional descriptive parameter. A string of up to 32 printable characters.
The default is null.
4.7.2.2.1.2 Sector Location
An optional descriptive parameter. A string of up to 64 printable characters.
The default is null (an empty string).
4.7.2.2.1.3 Sector Heading (degrees)
A descriptive parameter indicating the sector’s heading in degrees. A number from
0 to 359.
The default is 0.
4.7.2.2.1.4 Bandwidth
The bandwidth of the sector in MHz.
In the current release the supported options are 5* MHz and 10 MHz.
The default Bandwidth is 10 MHz.