User's Manual

Chapter 4 - Operation and Administration ASN-GW Menu
BreezeMAX Extreme 120 System Manual
The maximum tolerated jitter for BE and NRT QoS is set to 10ms.
4.6.2.10.7 QoS Parameters
The availability of specific QoS parameters depend on the selected QoS Type as
follows:
4.6.2.10.7.1 CIR
CIR is the minimum information transfer rate that the system is committed to
transfer under normal conditions (minimum reserved traffic rate). The rate is
averaged over a minimum increment of time, which is defined by the CT
parameter.
The range is from 32 to 54,000 Kbps.
CIR is applicable for NRT QoS.
4.6.2.10.7.2 MIR
MIR is the maximum information rate that the system will allow for the
connection (maximum sustained traffic rate). The rate is averaged over a
minimum increment of time, which is defined by the CT parameter.
The range is from 32 to 54,000 Kbps.
MIR is applicable for BE and NRT QoS. In NRT QoS MIR cannot be lower than CIR.
Table 4-10: Committed Time for BE and NRT QoS
CP (Committed Priority) CT (Committed Time)
0 200ms
1 100ms
250ms
Table 4-11: QoS Parameters
QoS Type QoS Parameters
BE MIR
NRT CIR, MIR