User's Manual

Chapter 4 - Operation and Administration BTS Menu
BreezeMAX Extreme 91 System Manual
The available options are All, BTS, ASN GW, Sector, BS, Radio Channel, GPS,
Antenna, MS and MS Service.
The default is All.
4.5.5.3.4 Specific Event Category
The Specific Event Category parameter enables limiting the display to traps of a
certain category.
The available options are All, Alarm, State Change, Configuration Change, System
Event.
The default is All.
4.5.5.4 Show Event Log Table By Selection Criteria
Select this option to display details of all events that meet the defined filtering
criteria (see “Event Log Selection Criteria” on page 90). For each event, the
following details are displayed:
 Seq#: The sequential identification number of the event (trap).
 Time: The Date and Time at which the event was generated.
 MO Type & Instance: The Type and Instance (ID number) of the applicable
Managed Object.
 Event Type: The type of event (first level of event description).
 Probable Cause: The probable cause of the event (second level of event
description).
 Specific Problem: The specific problem that caused the event (third level of
event description).
 Event Severity: The defined severity of the Event.
 Object Severity: The combined events severity for the Managed Object at the
time at which the event was generated.
 Group OID: Applicable only for Configuration Change event. Indication of the
changed parameter or the group of parameters where a change occurred.
 Event Description: Description of the event.