User's Manual

Chapter 4 - Operation and Administration BTS Menu
BreezeMAX Extreme 90 System Manual
 Specific Problem: The specific problem that caused the event (third level of
event description).
 Alarm Severity: The defined severity of the Alarm.
 Object Severity: The combined events severity for the Managed Object at the
time the alarm was generated.
For more details on alarms, refer to the Traps and Alarms document.
4.5.5.3 Event Log Selection Criteria
This submenu enables Select to view/update the filtering criteria for the Show
Event Log Table By Selection Criteria display (see “Show Event Log Table By
Selection Criteria” on page 91). For more details on events refer to the Traps and
Alarms document. The configurable filtering criteria are:
 Minimum Severity
 Last Days
 Managed Object Type
 Specific Event Category
4.5.5.3.1 Minimum Severity
The Minimum Severity parameter enables defining the minimum severity filter.
Traps whose severity is below the defined severity will not be displayed.
The available options are Clear, Indeterminate, Critical, Major, Minor, Warning.
The default is Clear severity, which means that all the traps in the log will be
displayed, including traps indicating that a problem has been resolved (cleared).
4.5.5.3.2 Last Days
The Days parameter enables defining the period for which traps will be displayed.
The available options are from 1 to 31 days. Only traps that occurred within the
last N days, where N is the value selected for this parameter, will be displayed.
The default is 1 day.
4.5.5.3.3 Managed Object Type
The Managed Object Type parameter enable limiting the display to traps
associated with a specific Managed Object type.