User's Manual

Appendix B. Preparing the Indoor-to-Outdoor Cable
BreezeNET BU-DS.11/RB-DS.11 B-1 User’s Guide
APPENDIX B. PREPARING THE INDOOR TO
OUTDOOR CABLE
The Indoor-to-Outdoor cable provides pin-to-pin connection on both sides. It is
supplied open-ended at the one side, to allow the installer to conveniently route the
cable into the waterproof seal off the Outdoor unit.
Figure 7-1 shows the wire pair connections required for the Indoor-to-Outdoor cable.
1 2 3 4 5 6 7 8
1 + 2
4 + 5
7 + 8
3 + 6
Figure 7-1. Ethernet Connector Pin Assignments
The pins are supplied crimped, with an additional set of spare uncrimped pins. Use the
contact insertion and removal tool supplied with the unit (Amphenol P/N 17 D 438
SP) to insert the crimped pins into the RJ45 connector.