User's Manual

Software DownLoad Procedure
BreezeNET BU-DS.11/RB-DS.11 5-1 User’s Guide
5. SOFTWARE DOWNLOAD PROCEDURE
1. Set the unit's IP address, using the DS.11 Management utility, and verify that the
PC's IP address belongs to the same Subnet Mask as the unit.
2. Ping the unit's IP address. Make sure that the Ping replies are being received.
3. Use the TFTP utility on the PC:
) Syntax: TFTP [-i] destination host [PUT] source file [password]
) Example: TFTP -i 199.203.141.30 put ap1100.arm private
Download will be completed within two minutes, and a message of successful file
transfer will be shown on the screen.
4. The unit resets itself automatically.
5. Check the diagnostics LEDs to verify that there is not hardware failure, and use
the DS.11 Management utility to make sure that the version number is correct.
Note: Do not disconnect any cables or try to stop the process before downloading is
completed.
All configured parameters are kept during the upgrade/download procedure.